Pump type: HP 40-160
Pumps of type HP 40-160 can be mounted on standard electric motor as well as on motors with specially extended shafts (shown on measure sketches), depending on required pump characteristics
Pump type: HPS 40-160 – Selfpriming pump
Pump of type HPS 40-160 is a self-priming variation from the rest of HP pumps.
SPECIFICATION & CHARACTERISTICS
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Cross-section
| Item | Description |
| 1 | Casing |
| 2 | Casing cover |
| 3 | Impeller |
| 4 | Carrier |
| 5 | Pump shaft |
| 6 | Split ring |
| 7 | Ring |
| 8 | O-Ring |
| 9 | Screw M10 |
| 10 | Screw M1 |
| 11 | Screw M6 |
| 12 | Stud M12 |
| 13 | Plug G1/2 A |
| 14 | Plug G1/4 A |
| 15 | Nut M10 |
| 16 | Nut M12 |
| 17 | Sealing ring |
| 18 | Sealing ring |
| 19 | Sealing ring |
| 21 | Shaft key |
| 22 | Mechanical seal |
| 23 | Air separator with bolts M6 |
| 24 | Air spearator casing |
| 25 | Electromotor |
Characteristic curves
